Temperature Sensor Replacement - Rear

REMOVAL PROCEDURE




1. Remove the left console trim panel.
2. Locate the rear zone temperature sensor, located below the rear blower motor on the rear blower motor assembly (2).
3. Grasp the sensor and rotate the sensor 1/4 turn in order to release the sensor from the rear blower motor assembly.
4. Remove the sensor from the blower motor assembly.
5. Disconnect the electrical connector (1) from the rear temperature sensor (2) and remove the sensor.

INSTALLATION PROCEDURE




1. Connect the rear temperature sensor (2) to the temperature sensor connector (1).
2. Install the sensor in the rear blower motor assembly, rotate the sensor 1/4 turn in order to secure the sensor (2) in the duct.
3. Install the left console trim panel.