Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2000 >> Eldorado Touring V8-4.6L VIN 9 >> Repair and Diagnosis >> Cruise Control >> Cruise Control Switch >> Service and Repair >> Cruise Release Switch Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Release Switch Replacement




REMOVAL PROCEDURE

NOTE: Proper stoplamp switch adjustment is essential. Improper stoplamp switch adjustment could cause brake drag and excessive brake lining wear.

1. Remove the left insulator panel.
2. Twist the upper switch (5) counter-clockwise and remove.
3. Disconnect the upper switch electrical connector.

INSTALLATION PROCEDURE

IMPORTANT: When installing the brake pedal switches it is very important that the brake pedal remain in the full up or at rest position or damage to the brake system and/or switch misadjustment may occur.

1. Connect the upper switch (5) electrical connector.
2. Install the upper switch (5) into the upper retainer. Face the switch connector to the 6 o'clock position.

IMPORTANT: The release switch assembly and the stoplamp switch assembly cannot be adjusted until after the brake booster pushrod is assembled to brake pedal assembly. Incorrect adjustment could cause the cruise control system to not work properly.

3. Adjust the switch. Refer to Cruise Release Switch Adjustment.
4. Install the left insulator panel.
pro multis · About Operation CHARM