Procedures

REMOVAL PROCEDURE




1. Open the door.
2 Carefully disengage the trim plate from the trim panel.
3 Disconnect the electrical connector from the lock switch.
4. Disengage the retainers on the backside of the switch.
5 Remove the door lock switch from the trim plate.


INSTALLATION PROCEDURE




1. Carefully engage the switch into the trim plate.
2 Connect the electrical connector (2) to the switch.
3 Position the lock trim plate (1) onto the trim panel.
4. Press the trim plate into the trim panel in order to secure.
5 Verify the door lock operation.
6 Close the door.