Wheelhouse Splash Shield Replacement

Wheelhouse Splash Shield Replacement

Removal Procedure





1. Remove the push pin retainers retaining the splash shield to the wheelhouse.
2. Remove the bolt retaining the splash shield to the wheelhouse.
3. Remove the clip retaining the splash shield to the rear of the wheelhouse.
4. Remove the splash shield from the wheelhouse.



Installation Procedure





1. Install the splash shields to the wheelhouse.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the clip in order to retain the splash shield to the rear of the wheelhouse.

Tighten the retainers to 3 N.m (27 lb in).

3. Install the bolt in order to retain the splash shield to the wheelhouse.
4. Install the push pin retainers in order to retain the splash shield to the wheelhouse.