Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2000 >> Escalade V8-5.7L VIN R >> Repair and Diagnosis >> Body and Frame >> Seats >> Power Seat Switch >> Service and Repair >> Lumbar Switch Replacement (Power Split Bench)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Lumbar Switch Replacement (Power Split Bench)



Lumbar Switch Replacement (Power Split Bench)

Removal Procedure





1. Remove the screws attaching the switch to the side of the seat cushion.
2. Pull the switch partially out of the seat cushion.
3. Remove the switch from the switch bezel.
4. Remove the switch wiring harness in-line connector.
5. Remove the switch and the wiring harness from the side of the seat cushion.



Installation Procedure





1. Route the switch wiring harness through the opening in the side of the seat cushion and through the opening in the seat frame.
2. Install the switch wiring harness to the vehicle wiring harness.
3. Install the switch wiring harness in-line connector.
4. Install the switch into the switch bezel.
5. Position the switch bezel into the seat cushion opening.
6. Install the screws.


pro multis · About Operation CHARM