Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wiper Motor Replacement




REMOVAL PROCEDURE
1. Remove the wiper arms.
2. Remove the air inlet grille panel.
3. Disconnect the electrical connector from the motor.

IMPORTANT: Do not remove the crank arm.

4. Loosen the nuts attaching the drive link brackets to the crank arm.
5. Remove the brackets from the wiper motor crank arm.
6. Remove the three bolts and the wiper motor from the vehicle.

INSTALLATION PROCEDURE
1. Install the wiper motor on the vehicle.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the three bolts.

Tighten
Tighten the three bolts to 7 N.m (62 lb in).

3. Install the drive link brackets to the wiper motor crank arm with the right side linkage closest to the wiper motor.

Tighten
Tighten the link nuts to 5 N.m (44 lb in).

4. Connect the electrical connector to the wiper motor.
5. Install the air inlet grille panel.
6. Install the wiper arms.