Lateral Accelerometer: Service and Repair

Removal Procedure





1. Turn OFF the ignition.
2. Remove the rear seat cushion.
3. Remove the 2 lateral accelerometer sensor mounting nuts.
4. Disconnect the lateral accelerometer sensor electrical connector (2).
5. Remove the lateral accelerometer sensor (1) from the mounting studs.



Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.





1. Install the lateral accelerometer sensor (1) onto the mounting studs.
Tighten
Tighten the 2 lateral accelerometer sensor nuts to 2.4 Nm (21 inch lbs.).
2. Connect the lateral accelerometer sensor electrical connector (2).
3. Install the rear seat cushion.
4. Perform the ABS Diagnostic System Check. Refer to A Diagnostic System Check - ABS.