Fog/Driving Lamp: Service and Repair

REMOVAL PROCEDURE




1. Remove the front air deflector.
2. Disconnect the fog lamp connector (2) from the fog lamp (1).




3. Remove the nuts (3) retaining the fog lamp (2) to the fog lamp bracket (1).
4. Remove the fog lamp (2).




5. If the fog lamp bracket requires replacement, remove the front bumper fascia.
6. Remove the nuts (1) retaining the fog lamp bracket (3) to the front impact bar (2).
7. Remove the fog lamp bracket (3).

INSTALLATION PROCEDURE




1. Install the fog lamp bracket (3).

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the nuts (1) that retain the fog lamp bracket (3) to the front impact bar (2).

Tighten
Tighten the fog lamp bracket mounting nuts to 9 N.m (80 lb in).




3. Install the front bumper fascia.
4. Install the tog lamp (2).
5. Install the nuts (3) to retain the fog lamp (2) to the tog lamp bracket (1).

Tighten
Tighten the fog lamp retaining nuts to 6 N.m (53 lb in).




6. Connect the fog lamp connector (2) to the fog lamp (1).
7. Install the front air deflector.