Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Expansion Block/Orifice Tube: Service and Repair

EXPANSION (ORIFICE) TUBE REPLACEMENT

TOOLS REQUIRED
^ J 26549-E Expansion Tube Remover kit
^ J 39400-A Halogen Leak Detector

REMOVAL PROCEDURE




1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Remove the refrigerant line screw and the clip.
3. Disconnect the evaporator inlet pipe connection.




4. Use a J 26549-E to remove the expansion tube.

INSTALLATION PROCEDURE




1. Use clean 525 viscosity refrigerant oil to coat the O-rings.
2. Install the expansion tube into the pipe with the short screen towards the evaporator.

NOTE: Refer to Fastener Notice in Service Precautions.




3. Connect the expansion tube dual O-ring joint.

Tighten
Tighten the dual O-ring joint to 24 N.m (18 lb ft).

4. Install the refrigerant line screw and the clip.
5. Recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
6. Leak test the fittings of the component using the J 39400-A.