Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2001 >> Seville STS V8-4.6L VIN 9 >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Power Seat Drive Cable Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Seat Drive Cable Replacement



Power Seat Drive Cable Replacement

Removal Procedure

Caution: Refer to SIR Handling Caution.
1. Disable the SIR. Refer to Disabling the SIR System.
2. Remove the seat bottom and frame assembly. Refer to Front Seat Cushion Replacement (Front Seat Cushion Replacement).
3. If the cable is equipped with a position sensor, remove the sensor retention clip and disconnect the electrical connector.




4. Squeeze the collar of the cable in order to release the cable.




5. Pull the cable out of the fitting until the cable end clears the fitting.
6. Remove the cable or cable/sensor assembly.



Installation Procedure





1. Install the cable or cable/sensor assembly by pushing the ends into the fittings until the clip snaps into place.
2. If the cable is equipped with a position sensor, install the sensor retention clip and connect the electrical connector.
3. Install the seat bottom and frame assembly. Refer to Front Seat Cushion Replacement (Front Seat Cushion Replacement).
4. Enable the SIR. Refer to Enabling the SIR System.


pro multis · About Operation CHARM