Clock Replacement - Console

REMOVAL PROCEDURE




1. Remove the console upper console by firmly grabbing the corners and pulling outwards.
2. Disconnect the electrical connector from the clock.
3. Remove the clock retaining screws.
4. Remove the clock from the bezel.

INSTALLATION PROCEDURE




1. Install the clock to the bezel.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the clock retaining screws.

Tighten
Tighten the nut to 2 N.m (18 lb in).

3. Connect the electrical connector to the clock.
4. Install the floor console bezel by pushing in the corners.