Sunroof / Moonroof Module: Service and Repair

POWER SUNROOF MODULE REPLACEMENT

REMOVAL PROCEDURE




1. The sunroof glass panel must be in the closed position.
2. Remove the headliner.
3. Remove the sunroof glass panel.
4. Remove the drain channel.
5. Remove the sunshade.
6. Remove the 9 bolts retaining the module to the roof.
7. Remove the module from the vehicle.

INSTALLATION PROCEDURE




1. Install the module to the vehicle.

NOTE: Refer to Fastener Notice in Service Precautions.




2. Loosely install the 9 bolts retaining the module to the roof.
Use a drill bit to align the 2 holes (6 and 7).

Tighten
Tighten the bolts in the sequence shown to 9 N.m (80 lb in).

3. Install the sunshade.
4. Install the drain channel.
5. Install the sunroof glass panel.
6. Install the headliner.
7. Inspect the operation of the sunroof.