Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Inflatable Restraint Side Impact Sensor Replacement

REMOVAL PROCEDURE

CAUTION: Refer to SIR Caution in Service Precautions.




1. Disable the SIR system.
2. Remove the front door trim panel.
3. Loosen the 2 inflatable restraint side impact sensor fasteners (2).
4. Remove the inflatable restraint side impact sensor (1) from the door (4).
5. Remove the connector position assurance (CPA) (3) and disconnect the inflatable restraint side impact sensor yellow 2-way harness connector (5).

INSTALLATION PROCEDURE




1. Connect the inflatable restraint side impact sensor yellow 2-way harness connector (5) to the inflatable restraint side impact sensor (1).
2. Install the connector position assurance (CPA) (3) to the inflatable restraint side impact sensor yellow 2-way connector (5).
3. Install the inflatable restraint side impact sensor (1) to the door (4).

NOTE: Refer to Fastener Notice in Service Precautions.

4. Install the fasteners (2) to the inflatable restraint side impact sensor (1).

Tighten
Use only hand tools in order to tighten the fasteners to 10 N.m (89 lb in).

5. Install the door trim panel.
6. Enable the SIR system.