Brake Rotor/Disc
Front Brakes JC5/JH5 AllRotor Discard Thickness * 27.50 mm (1.082 inch)
Rotor Minimum Allowable Thickness After Refinish 28 0 mm (1.10 inch)
Rotor Thickness-new 29.0 mm (1.14 inch)
Rotor Maximum Allowable Lateral Runout 0.05 mm (0.002 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Front Brakes JH6
Rotor Discard Thickness * 36.50 mm (1.437 inch)
Rotor Minimum Allowable Thickness After Refinish 37.0 mm (1.46 inch)
Rotor Thickness-new 38.0 mm (1.50 inch)
Rotor Maximum Allowable Lateral Runout 0.05 mm (0.002 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Rear Brakes JC5/JH5 Utility Only
Rotor Discard Thickness* 28.50 mm (1.122 inch)
Rotor Minimum Allowable Thickness After Refinish 29.0 mm (1.142 inch)
Rotor Thickness-new 30.0 mm (1.181 inch)
Rotor Maximum Allowable Lateral Runout 0.05 mm (0.002 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Rear Brakes JH6
Rotor Discard Thickness * 27.50 mm (1.082 inch)
Rotor Minimum Allowable Thickness After Refinish 28.0 mm (1.102 inch)
Rotor Thickness-new 29.0 mm (1.141 inch)
Rotor Maximum Allowable Lateral Runout 0.05 mm (0.002 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
* All brake rotors have a discard dimension cast into them Replace any rotor that does not meet this specification After refinishing the rotor, replace any rotor that does not meet the minimum or discard thickness specifications.
Backing Plate Bolts 135 Nm (100 ft. lbs.)