Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cabin Temperature Sensor / Switch: Service and Repair

INSIDE AIR TEMPERATURE SENSOR ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE
1. Remove the left closeout insulator Panel.
2. Remove the left knee bolster bracket.




3. Disconnect the inside air temperature sensor assembly (1) electrical connector.
4. Remove the screws (2) from the inside air temperature sensor assembly.




5. Remove the inside air temperature sensor (1) from the vehicle.

INSTALLATION PROCEDURE




1. Install the inside air temperature sensor (1) to the IP.




2. Install the inside air temperature sensor assembly (1) screw (2).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Tighten the screw (2).

Tighten
Tighten the screw to 1.4 N.m (12 lb in).

4. Connect the inside air temperature sensor assembly (1) electrical connector.
5. Install the left knee bolster bracket.
6. Install the left closeout insulator panel.