Seat Replacement - Rear No. 1 (Bucket)

SEAT REPLACEMENT - REAR NO. 1 (BUCKET)

REMOVAL PROCEDURE
1. Remove the front and the rear leg trim covers.
2. Remove the covers in order to access the seat bolts.
3. Disconnect the electrical connectors, if equipped.
4. Remove the seat retaining bolts.




5. Remove the seat from the vehicle.

INSTALLATION PROCEDURE




1. Install the seat into the vehicle.
2. Install the seat retaining bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the bolts to 55 N.m (41 lb ft).

3. Connect the electrical connectors, if equipped.
4. Install the covers to the seat bolts.
5. Install the front and the rear leg trim covers.