49. Direct Clutch Piston Travel Check

^ Tools Required
- J 8001 Dial Indicator Set
- J 7057 Dial Indicator Plunger Extension





1. Attach the J 7057 (not visible in the illustration) to the J 8001-3.
2. Mount the J 8001-3 to the transmission case through the opening in the case barrel using the J 8001-1. Place the J 7057 onto the direct clutch piston.
3. Index the J 8001-3. Set the dial to 0.
4. Apply 80 psi of air pressure to the direct clutch fluid passage, in the case bottom, in order to actuate the direct clutch piston. Refer to Transmission Component Location, Case Fluid Passages Illustration.
5. The direct clutch piston travel should be 1.27-4.369 mm (0.050-0.172 inch).
6. Remove the tools.