Blower Motor Replacement

BLOWER MOTOR REPLACEMENT

REMOVAL PROCEDURE
1. Remove the right side sound insulator.




2. Remove the I/P compartment.
3. Remove the dash Integration module from the bracket.
4. Remove the 2 rear dash integration module bracket screws.
5. Reposition the dash integration module bracket in order to remove the blower motor.




6. Disconnect the electrical connector (1) from the blower motor.
7. Disconnect he blower motor ventilation tube (2) from the module.




8. Remove the blower motor retaining fasteners (1).
9. Remove the blower motor from the vehicle.

INSTALLATION PROCEDURE




1. Install the blower motor into the housing.
2. Install the blower motor retaining screws (1).




3. Connect the electrical connector (1) to the blower motor.
4. Connect the blower motor ventilation tube (2) to the module.




5. Reposition the dash integration module bracket to the original position.
6. Install the 2 rear dash integration module bracket fasteners.
7. Install the I/P compartment.
8. Install the right side sound insulator.