Fastener Tightening Specifications

TORQUE SPECIFICATIONS




Left




Right

Cylinder Head Bolt
First Pass 25 Nm (18 ft. lbs.)
Second Pass 90 degrees
Third Pass 90 degrees
Fourth Pass 90 degrees
Fifth Pass 15 degrees
Cylinder Head Bolt Reuse Always New




left




right

Camshaft
Camshaft Bearing Cap Bolt 8 Nm (71 inch lbs.)
Camshaft Sprocket Bolt
First Pass 50 Nm (37 ft. lbs.)
Second Pass 60 degrees
Third Pass 15 degrees

Intake Manifold
Intake Manifold Bolt 20 Nm (15 ft. lbs.)
Intake Manifold Flange Bolt 20 Nm (15 ft. lbs.)
Intake Plenum Bolt 20 Nm (15 ft. lbs.)

Exhaust Manifold
Nut 20 Nm (15 ft. lbs.)
Stud 30 Nm (22 ft. lbs.)