Antenna Module Replacement
ANTENNA MODULE REPLACEMENTREMOVAL PROCEDURE
1. Remove the left rear sail panel.
2. Remove the rear assist handles.
3. Disconnect the electrical connectors from the radio antenna module.
4. Remove the fastener retaining the radio antenna module to the roof beam.
5. Remove the radio antenna module.
INSTALLATION PROCEDURE
1. Install the radio antenna module to the root beam, ensuring that the alignment tab is properly located.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install radio module retaining fastener.
Tighten
Tighten the fastener to 9 N.m (80 lb in).
3. Connect the electrical connectors to the radio antenna module.
4. Install the rear assist handles.
5. Install the left rear sail panel.