Cylinder Head Assembly
Exhaust ManifoldBolt 25 Nm (18 ft. lbs.)
Flange Bolt 25 Nm (18 ft. lbs.)
Nut 25 Nm (18 ft. lbs.)
Important: DO NOT reuse the old M11 cylinder head bolts.
Cylinder Head Bolt (M11)
First Pass 30 Nm (22 ft. lbs.)
Second Pass +60 degrees
Third Pass +60 degrees
Final Pass +60 degrees/180 degrees Total
Cylinder Head Bolt (M6) 12 Nm (106 inch lbs.)
Intake Manifold Bolt 10 Nm (89 inch lbs.)
Cylinder Head Deck Height 224.55 mm (8.8406 inch)
Cylinder Head Deck Surface Flatness 0.100 mm (0.0039 inch)
Camshaft Bearing Cap Bolt
First Pass 5 Nm (44 inch lbs.)
Final Pass +30 degrees