Instruments - Outside R/View Mirror Won't Work Smoothly
Bulletin No.: 05-08-64-034Date: October 24, 2005
TECHNICAL
Subject:
Outside Rearview (OSRV) Mirror Does Not Work Smoothly, Mirror Does Not Return to Programmed Position (Reprogram Driver Door Module (DDM) and Front Passenger Door Module (FPDM))
Models:
2005 Cadillac STS
Built Prior to April 5, 2005
Attention:
Use GMVIS to determine vehicle build date. This bulletin only applies to vehicles built prior to April 5, 2005.
Condition
Some customers may comment that the outside rearview (OSRV) mirrors do not work smoothly and at times do not return to their programmed position.
Correction
Technicians are to reprogram the Driver Door Module (DDM) and the Front Passenger Door Module (FPDM) with an updated software calibration. These new service calibrations were released with TIS satellite data update version 10.5 available October 17, 2005. As always, make sure your Tech 2(R) is updated with the latest software version.
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer