Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2005 >> STS V6-3.6L VIN 7 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Barometric Pressure Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Barometric Pressure Sensor: Service and Repair



BAROMETRIC PRESSURE (BARO) SENSOR REPLACEMENT

REMOVAL PROCEDURE




- Turn the ignition OFF.
- Remove the fuel injector sight shield.
- Disconnect the barometric pressure (BARO) sensor electrical connector.




- Remove the BARO sensor bolt.
- Remove the BARO sensor.

INSTALLATION PROCEDURE




- Install the BARO sensor.
- Install the BARO sensor bolt.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the sensor bolt to 10 N.m (89 lb in).




- Connect the BARO sensor electrical connector.
- Install the fuel injector sight shield.
pro multis · About Operation CHARM