Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2005 >> STS V6-3.6L VIN 7 >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Steering Column >> Service and Repair >> Multifunction, Turn Signal Switch
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Multifunction, Turn Signal Switch


Multifunction, Turn Signal Switch Replacement
Removal Procedure

1. Caution: Refer to Restraint Systems in Service Precautions.

Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in Restraint Systems.
2. Remove the steering column trim covers.





3. Remove the retaining screws from the multifunction switch.
4. Disconnect the multifunction switch electrical connections.
5. Remove the multifunction switch.

Installation Procedure
1. Connect the multifunction switch electrical connectors.
2. Install the multifunction switch to the steering column.





3. Notice: Refer to Fastener Notice in Service Precautions.

Install the retaining screws to the multifunction switch.
Tighten the screws to 7 Nm (62 inch lbs.).
4. Install the steering column trim covers.
5. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in Restraint Systems.
pro multis · About Operation CHARM