Body Control Module (BCM) - Programming & Setup

BODY CONTROL MODULE PROGRAMMING AND SETUP

BODY CONTROL MODULE (BCM) REPLACEMENT
If the body control module (BCM) is replaced, the following procedures must be performed in the order described:
1. BCM Setup
2. BPP Sensor Calibration
3. Program VIN

Refer to Body Control Module (BCM) Programming/RPO Configuration in Computer/Integrating Systems.

INFLATABLE RESTRAINT SENSING AND DIAGNOSTIC MODULE (SDM) REPLACEMENT
If the sensing and diagnostic module (SDM) is replaced, the BCM Setup procedure must be performed.

Refer to Body Control Module (BCM) Programming/RPO Configuration in Computer/Integrating Systems, for BCM Setup procedure.

BRAKE PEDAL POSITION (BPP) SENSOR REPLACEMENT
If the brake pedal position (BPP) sensor is replaced, the BPP Sensor Calibration procedure must be performed. Refer to Brake Pedal Position Sensor Calibration in Lighting Systems.