Remote Control Door Lock Receivers - Programming and Setup

REMOTE CONTROL DOOR LOCK RECEIVER PROGRAMMING AND SETUP

Each of the following service procedures require programming or setup procedures to be performed on the theft deterrent control module.

Remote Control Door Lock Receiver
If the remote control door lock receiver (RCDLR) is replaced, the following procedures must be performed:
1. Set Up a new remote control door lock receiver-Refer to Programming Theft Deterrent System Components (RCDLR Setup) Programming Theft Deterrent System Components (Domestic) Programming Theft Deterrent System Components (Export - Including Canada) in Theft Deterrent.
2. Keyless entry transmitter programming-Refer to Transmitter Programming (Domestic) Transmitter Programming (Export - Including Canada) in Keyless Entry.
3. Theft deterrent 10-minute relearn procedure-Refer to Programming Theft Deterrent System Components (RCDLR Setup) Programming Theft Deterrent System Components (Domestic) Programming Theft Deterrent System Components (Export - Including Canada) in Theft Deterrent.
4. Tire pressure sensor learn-Refer to Tire Pressure Sensor Learn in Tire Pressure Monitoring.
5. Steering column lock control module setup-Refer to Control Module Setup (SCLCM Setup) in Steering Wheel and Column.

Replacing Keyless Entry Transmitters
If a keyless entry transmitter is replaced, the following procedure must be performed:
Keyless entry transmitter programming-Refer to Transmitter Programming (Domestic) Transmitter Programming (Export - Including Canada) in Keyless Entry.