Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rearview Mirror Replacement (With RPO Code DD7, DD8)



REARVIEW MIRROR REPLACEMENT (DD7, DD8)

REMOVAL PROCEDURE




1. Remove the wire harness cover from the lighted rearview mirror, if equipped.




2. Remove the screw from the base.
3. Slide mirror off of the support.
4. Disconnect the electrical connector from the lighted rearview mirror, if equipped.

INSTALLATION PROCEDURE
1. Connect the electrical connector to the mirror.




2. Slide the mirror onto the support base.

NOTE: Refer to Fastener Notice.

3. Install the screw to the base.

Tighten the screw to 1.8 N.m (16 lb in).




4. Secure the electrical harness cover to the rearview mirror.
5. Reposition the mirror.
6. Calibrate the mirror. Refer to Control Module References for programming and setup information.