Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2006 >> CTS V6-2.8L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Fluid Line/Hose >> Service and Repair >> Transmission Fluid Cooler Line Quick Connect Fitting
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Fluid Cooler Line Quick Connect Fitting



Transmission Fluid Cooler Line Quick Connect Fitting

Tools Required
^ J44827 Transmission Cooler Quick Disconnect

Removal Procedure





1. Locate the transmission oil cooler (TOC) quick connect fitting (1).





2. Important: Be sure that the lock tang on the release tool is properly engaged.

Install the J44827 onto the TOC pipe.





3. Slide the J44827 toward the TOC quick connect fitting.





4. Insert the J44827 into the TOC quick connect fitting. The distance between the quick connect fitting and J44827 should be approximately 2.00 mm (0.080 inch).





5. Pull back on the TOC pipe to disengage the pipe from the TOC quick connect fitting.
6. Remove the J44827 from the TOC pipe.

Installation Procedure





1. Important: Inspect the TOC quick connect fitting for signs of wear or damage. Replace the components if necessary.

Install the TOC pipe into the TOC quick connect fitting. A distinct snap should be heard or felt when assembling the TOC pipe to the quick connect fitting.
2. To ensure the cooler line is properly installed, give the cooler pipe a gentle pull.
pro multis · About Operation CHARM