Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2006 >> DTS V8-4.6L VIN Y >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Knock Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor: Service and Repair



KNOCK SENSOR (KS) REPLACEMENT

REMOVAL PROCEDURE




1. Remove the intake manifold.
2. Disconnect the crankshaft position (CKP) sensor wiring harness electrical connector (3) from the right knock sensor, if required.




3. Disconnect the CKP sensor wiring harness electrical connector (2) from the left knock sensor, if required.




4. Remove the appropriate knock sensor. (cylinder heads shown removed for clarity).

INSTALLATION PROCEDURE




1. Install the appropriate knock sensor.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the sensor to 25 N.m (18 lb ft).




2. Connect the CKP sensor wiring harness electrical connector (2) to the left knock sensor, if required.




3. Connect the CKP sensor wiring harness electrical connector (3) to the right knock sensor, if required.
4. Install the intake manifold.
pro multis · About Operation CHARM