124. Ignition Module Installation - Left Side

Ignition Module Installation - Left





1. Notice: Refer to Fastener Notice .

Install the left spark plugs.
^ Tighten the spark plugs to 15 Nm (11 ft. lbs.).





2. Apply a small amount of dielectric grease GM P/N 12345579, (Canadian P/N 1974984), to each spark plug boot (1) of the ignition coil assembly.





3. Carefully, install the left ignition coil assembly.





4. Install the left ignition coil assembly bolts (708) and studs (709).
^ Tighten the left ignition coil assembly bolts (708) and studs (709) to 10 Nm (89 inch lbs.).





5. Install the left ignition coil assembly cover.