Headlamp Leveling Sensor Replacement - Front

HEADLAMP LEVELING SENSOR REPLACEMENT - FRONT

REMOVAL PROCEDURE
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the right front tire and wheel assembly.




3. Disconnect the electrical connector (1).




4. Disconnect the ball and socket (1) from the vehicle.
5. Remove the bolt (2) from the sensor.
6. Remove the sensor from the vehicle.

INSTALLATION PROCEDURE




1. Position the sensor to the vehicle.
2. Install the bolt (2) to secure the sensor to the vehicle.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolt to 9 N.m (80 lb in).

3. Install the ball and socket (1) to the sensor.




4. Connect the electrical connector (1) to the sensor.
5. Install the right tire and wheel assembly.
6. Lower the vehicle.