Traction Control Switch: Service and Repair

Traction Control Switch Replacement

Removal Procedure




1. Turn OFF the ignition.
2. Remove the instrument panel (I/P) compartment.
3. Carefully depress the retainers on the traction control switch (2).
4. Remove the traction control switch (2) from the I/P compartment.
5. Remove the electrical connector (1) from the traction control switch (2).

Installation Procedure




1. Connect the electrical connector (1) to the traction control switch (2).
2. Carefully push the traction control switch into the I/P compartment until it is locked into place.
3. Install the I/P compartment.