Rear Camber Adjustment

Rear Camber Adjustment

Tools Required

J 45845 Caster and Camber Adjusting Tool




1. Install J 45845 to the lower control arm and the frame.
2. Loosen the lower control arm to frame bolt.

Notice: Refer to Fastener Notice.

3. Adjust the camber angle by turning the turnbuckle on J 45845 until the specifications have been met.

Tighten the bolt to 150 N.m (111 lb ft).

4. Verify that the camber is still with specifications. Refer to Wheel Alignment Specifications.
5. Adjust the rear toe. Refer to Rear Toe Adjustment.