Engine Valley Cover: Service and Repair

Engine Valley Cover Replacement

Removal Procedure




1. Remove the intake manifold.
2. Remove the oil pressure switch.
3. Remove the engine valley retaining bolts (1).
4. Remove the engine valley cover (2).
5. Remove the engine valley gasket (3).
6. Remove the O-rings (4) from the engine valley cover (2).

Installation Procedure




1. Install the O-rings (4) to the engine valley cover (2).
2. Install the engine valley gasket (3).
3. Install the engine valley cover (2).
4. Install the retaining bolts (1).

Notice: Refer to Fastener Notice.

5. Tighten the engine valley retaining bolts.

Tighten the engine valley cover bolts to 25 N.m (18 lb ft).

6. Install the intake manifold.
7. Install the oil pressure switch.