Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2007 >> CTS V8-6.0L >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Air Flow Meter/Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Flow Meter/Sensor: Service and Repair



Mass Airflow Sensor/Intake Air Temperature Sensor Replacement

Removal Procedure




1. Disconnect the MAF/IAT sensor electrical connector (1).
2. Remove the air cleaner outlet duct assembly.
3. Loosen the MAF/IAT clamp (2).

Notice:
* Handle the MAF sensor carefully.

* Do not drop the MAF sensor in order to prevent damage to the MAF sensor.

* Do not damage the screen located on the air inlet end of the MAF.

* Do not touch the sensing elements.

* Do not allow solvents and lubricants to come in contact with the sensing elements.

* Use a small amount of a soap based solution in order to aid in the installation.

Remove the MAF/IAT sensor from the air cleaner outlet duct. Note the position of the MAF/IAT sensor.

Installation Procedure






Notice:
* Handle the MAF sensor carefully.

* Do not drop the MAF sensor in order to prevent damage to the MAF sensor.

* Do not damage the screen located on the air inlet end of the MAF.

* Do not touch the sensing elements.

* Do not allow solvents and lubricants to come in contact with the sensing elements.

* Use a small amount of a soap based solution in order to aid in the installation.

1. Carefully install the MAF/IAT sensor to the air cleaner outlet duct. Ensure that sensor is clocked properly.

Notice: Refer to Fastener Notice.

2. Tighten the air cleaner outlet duct clamp (2).

Tighten the air cleaner outlet duct clamp to 3 N.m (27 lb in).

3. Loosely install the air cleaner outlet duct assembly to the vehicle.
4. Connect the MAF/IAT sensor electrical connector.
5. Install the air cleaner outlet duct assembly.
pro multis · About Operation CHARM