Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2007 >> DTS V8-4.6L >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Fuel Injector >> Service and Repair >> Fuel Injector Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Injector Replacement



Fuel Injector Replacement

Removal Procedure

Important: If the fuel injectors are leaking, the engine oil may be contaminated with fuel.




1. Remove the fuel rail.
2. Remove the fuel injector fuel rail clip (1).
3. Remove the fuel injector (3).
4. Remove and discard the fuel injector upper (2) and lower (4) O-ring seals.

Installation Procedure

Caution: In order to reduce the risk of fire and personal injury that may result from a fuel leak, always install the fuel injector O-rings in the proper position. If the upper and lower O-rings are different colors (black and blue), be sure to install the blue O-ring in the upper position and the black O-ring in the lower position on the fuel injector. The O-rings are the same size but are made of different materials.

Important:
* Be sure to use the correct part number when ordering replacement fuel injectors.

* The fuel injector O-ring seal should always be replaced whenever the fuel injectors are serviced. Be sure to install the correct O-ring seal for the fuel injector. If the O-ring seal is not seated properly, a vacuum leak is possible and driveability complaints may occur.




1. Lubricate the NEW O-rings seals with clean engine oil.
2. Install the NEW upper (2) and lower (4) injector O-rings seal onto the fuel injector.
3. Install the fuel injector (3) into the fuel rail.
4. Install the fuel injector fuel rail clip (1).
5. Install the fuel rail.

pro multis · About Operation CHARM