Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2007 >> DTS V8-4.6L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Assemble, Disassemble, and Installation >> Lower Controls Assembly Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Lower Controls Assembly Installation



Lower Controls Assembly Installation




1. Place the lower controls assembly over the forward support studs.

Important: The bolts (958) without the flange are located next to the oil transfer plate.

2. Hand start the bolts (534, 958) into the channel plate.
3. Install the two nuts (955) on the forward support studs.




4. Place the oil transfer plate (956) over the open gasket area.
5. Position the lower control valve body wire harness retaining clips (943).

Notice: Refer to Fastener Notice in service precautions.

6. Hand start the bolts (534) to hold the oil transfer plate (956) in place with the lower control valve body wire harness retaining clips (943) attached properly.

Tighten the bolts and nuts (534) to 8-14 N.m (6-10 lb ft).

pro multis · About Operation CHARM