Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Procedures



Sunroof Manual Operation

The sunroof motors and sunroof sunshade motors may be operated manually.




1. If the front window is partially open, remove the front window.
2. Remove the center sunroof window.

Important: The four-motor/actuator assembly is for the ultraview-full sunroof with the rear vent.






Important: The two motor/actuator assembly is for the ultraview-half sunroof without the rear vent.

3. Install a 5/32 in Allen wrench into the hex head gear drive, located on top of the motors.
4. Turn the Allen wrench clockwise to open the sunroof and sunshade. Turn the Allen wrench clockwise to close the sunroof and sunshade.
5. After opening or closing the sunroof for service, remove the Allen wrench.
6. Install the front window, if necessary.
7. Install the center sunroof window.
8. Initialize the sunroof and sunshade. Refer to Sunroof Rear Window Initialization Process or to Sunroof Front Window/Sunshade Initialization Process.