Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2007 >> STS AWD V8-4.6L >> Repair and Diagnosis >> Lighting and Horns >> Headlamp >> Headlamp Alignment Sensor >> Service and Repair >> Headlamp Leveling Front Suspension Height Sensor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Headlamp Leveling Front Suspension Height Sensor Replacement



Headlamp Leveling Front Suspension Height Sensor Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the right front tire and wheel assembly.




3. Disconnect the electrical connector (1).




4. Disconnect the ball and socket (1) from the vehicle.
5. Remove the bolt (2) from the sensor.
6. Remove the sensor from the vehicle.

Installation Procedure




1. Position the sensor to the vehicle.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the bolt (2) to secure the sensor to the vehicle.

Tighten the bolt to 9 N.m (80 lb in).

3. Install the ball and socket (1) to the sensor.




4. Connect the electrical connector (1) to the sensor.
5. Install the right tire and wheel assembly.
6. Lower the vehicle.

pro multis · About Operation CHARM