Seals and Gaskets: Service and Repair

Transfer Case Input Shaft Seal Replacement

Tools Required

* J-2619-A Slide Hammer w/Adapter
* J 8092 Driver Handle
* J 45278 Seal Remover
* J 46269 Input Seal Installer





1. Remove the transfer case.
2. Using the J 45278 (2) and the J-2619-A (1), slide the hook end of the J 45278 beside the seal lip and shaft. Turn the hook approximately 60 degrees and pull the seal out with the J-2619-A (1).





3. Clean the seal area (1) and input shaft of any old seal material with solvent.





4. Use the J 8092 (1) and the J 46269 (2) to drive in a NEW input seal.
5. Install the transfer case.