Driver Seat Back Insert Cover Pad Replacement

Driver Seat Back Insert Cover Pad Replacement

Removal Procedure




1. Remove the insert at the seat back. Push down on the insert to disengage the insert from the ventilation duct.
2. Remove the lower fir tree retainers at the bottom of the insert.
3. Remove the insert from the seat.
4. Open the insert cover hook and the loop flaps.
5. Remove the cover from the pad.

Installation Procedure




1. Install the cover onto the pad.
2. Close the cover flaps and engage the hook and the loop.
3. Install the insert to the seat back.
4. Install the fir tree retainers at the bottom of the insert.
5. Install the insert to the ventilation duct at the top. Push down and under the duct. Then pull up to engage the insert.