Evaporator Drain Tube: Service and Repair

Evaporator Drain Tube Replacement

Removal Procedure

1. Remove the intake manifold.
2. Remove the engine wire harness bracket bolt.
3. Disconnect engine wire harness electrical connector and reposition aside.




4. Remove the HVAC module drain tube (1) from the HVAC module.

Installation Procedure

Important: Ensure that the HVAC module drain tube is fully seated onto the HVAC module.




1. Install the HVAC module drain tube (1) to the HVAC module.
2. Connect engine wire harness electrical connector.

Notice: Refer to Fastener Notice.

3. Install the engine wire harness bracket bolt.

Tighten the bolt to 10 N.m (89 lb in).

4. Install the intake manifold.