Transmission Pressure Test Port: Service and Repair
Automatic Transmission Fluid Pressure Test Hole Plug Replacement
Removal Procedure
1. Remove the throttle body air inlet duct. Refer to Air Cleaner Outlet Duct Replacement (Service and Repair) .
2. Remove the oil pressure test plug (1).
Installation Procedure
Notice: Refer to Fastener Notice (Fastener Notice) .
1. Install the oil pressure test plug (1).
Tighten the oil pressure test plug to 12 N.m (106 lb in).
2. Install the throttle body air inlet duct. Refer to Air Cleaner Outlet Duct Replacement (Service and Repair) .