Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2008 >> SRX AWD V6-3.6L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Body and Frame >> Power Seat Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Seat Control Module: Service and Repair



Rear Seat Control Module Replacement - Rear Seat Number 2

Removal Procedure

1. Remove the seat cushion frame. Refer to Rear Seat Number 2 Cushion Frame Replacement (Rear Seat Number 2 Cushion Frame Replacement) .




2. Disconnect the electrical connector (1) from the seat control module.
3. Remove the nuts from the control module (2).
4. Remove the module.



Installation Procedure

1. Install the seat control module on to seat adjuster.





Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the seat control module nuts (2).

Tighten the nuts to 9 N.m (80 lb in).

3. Connect the electrical connector (2) to the control module.
4. Install the seat cushion frame. Refer to Rear Seat Number 2 Cushion Frame Replacement (Rear Seat Number 2 Cushion Frame Replacement) .
5. Calibrate the seat. Refer to Power Folding Seat Calibration (Programming and Relearning) .


pro multis · About Operation CHARM