Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2008 >> XLR V8-4.4L SC >> Repair and Diagnosis >> Instrument Panel, Gauges and Warning Indicators >> Outside Temperature Display >> Outside Temperature Display Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Outside Temperature Display Sensor: Service and Repair



Ambient Air Temperature Gage Sensor Replacement

Removal Procedure

1. Remove the knee bolster. Refer to Driver Knee Bolster Panel Replacement (Service and Repair) .
2. Remove the driver information center retaining screw.
3. Disconnect driver information center from the instrument panel (I/P).
4. Disconnect the inside air temperature sensor from the driver information center (DIC) bezel.




5. Disconnect the inside air temperature sensor electrical connector.



Installation Procedure

1. Connect the inside air temperature sensor electrical connector.





Important: Ensure that the inside temperature sensor is fully seated into the DIC bezel.


2. Install the inside air temperature sensor.
3. Connect driver information center to the I/P.

Notice: Refer to Fastener Notice (Fastener Notice) .

4. Install the driver information center retaining screw.

Tighten the screw to 1.9 N.m (17 lb in).

5. Install the knee bolster. Refer to Driver Knee Bolster Panel Replacement (Service and Repair) .


pro multis · About Operation CHARM