License Plate Lamp: Service and Repair

Rear License Lamp Replacement

Removal Procedure

1. Remove the back up lamp assembly. Refer to Backup Lamp Replacement (Service and Repair) .




2. Remove the screws (2) attaching the license lamp (1) to the rear compartment lid.
3. Remove the license lamp from the rear compartment lid.
4. Remove the bulb/socket from the license lamp.



Installation Procedure

1. Install the license lamp bulb/socket to the license lamp.




2. Postion the license lamp (1) to the rear compartment lid.

Notice: Refer to Fastener Notice (Fastener Notice) .

3. Install the license lamp screws (2).

Tighten the screws to 2 N.m (18 lb in).

4. Inspect the license lamp for proper operation.
5. Install the back up lamp. Refer to Backup Lamp Replacement (Service and Repair) .