Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Radiator Replacement




Radiator Replacement

Special Tools

J 38185 Hose Clamp Pliers

Removal Procedure

1. Remove the cooling fan shroud assembly. Refer to Engine Coolant Fan Shroud Replacement (Service and Repair).




2. Lift the radiator up and out the vehicle.

Installation Procedure




1. Install the radiator to the vehicle.





Note: Care should be taken when installing the condenser not to damage the lower attachment points of both the radiator and condenser.

2. Position the condenser, aligning the lower feet to the lower mounting features located at the front of the radiator.





Caution: Refer to Fastener Caution (Fastener Caution).

Note: The bolts retaining the condenser to the radiator end tanks are a special length and should be the ONLY bolts used upon reinstallation. The use of longer bolts will damage the radiator end tanks.

3. Install the condenser mounting bolts.

Tighten the bolts to 13 Nm (115 lb in).

4. Install the fan shroud assembly. Refer to Engine Coolant Fan Shroud Replacement (Service and Repair).