Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2011 >> CTS Sedan RWD V8-6.2L SC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Level Sensor >> Service and Repair >> Fuel Level Sensor Replacement - Right Side
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Level Sensor Replacement - Right Side




Fuel Level Sensor Replacement - Right Side

Removal Procedure
Warning: Refer to Gasoline/Gasoline Vapors Warning (Service Precautions).


1. Remove the fuel tank pump module. Refer to Fuel Tank Fuel Pump Module Replacement - Right Side (Service and Repair).





Note: Do not pull on the connector wires.

2. Press in the locking tab (1) and disconnect the fuel level sensor electrical connector.




3. Disconnect the fuel level sensor electrical connector (1).





Note: Do not touch the resistor circuit board.

4. Disengage the locking tab (1) on the fuel level sensor by pushing inward.




5. Slide the fuel level sensor (1) upward to the stationary lock (2).




6. Remove the fuel level sensor (1).

Installation Procedure




1. Install the fuel level sensor (1).





Note: Do not push on the electrical terminals.

2. Slide the fuel level sensor (1) downward until the locking tab (2) locks into place.





Note: Do not push on the electrical wires.

Note: Ensure the connector locking tab is fully seated into the flange.

3. Connect the fuel level sensor electrical connector (1).
4. Install the fuel tank pump module. Refer to Fuel Tank Fuel Pump Module Replacement - Right Side (Service and Repair).

pro multis · About Operation CHARM