Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wheel Bearing: Adjustments

FRONT WHEEL BEARINGS ADJUSTMENT

1. While rotating wheel in the forward direction, torque spindle nut to 12 lb ft
2. Back spindle nut off to the just loose position.
3. Hand tighten spindle nut, then loosen until cotter holes are aligned and install cotter pin. Do not loosen nut more than 1/2 flat to align cotter pin holes.
4. With bearings properly adjusted, endplay must be .001---.005 inch.