Blower Motor: Service and Repair

Fig. 25 Typical blower motor installation. 1982 Corvette:

CORVETTE
1982

1. Disconnect battery ground cable.
2. Remove A/C compressor mounting bolts and position compressor aside with refrigerant lines attached.
3. Remove air cleaner from front and right side inlet ducts, then position air cleaner out of way.
4. Remove engine coolant recovery bottle.
5. Disconnect hose and electrical connections from blower motor.
6. Remove blower motor mounting flange attaching screws, then remove blower with impeller from vehicle, Fig. 25.